BASF Ultrafuse PET
Ultrafuse PET (previously Innofil3D EPR InnoPET, different name, same high-quality product!) is made from a premium, food approved PET (Polyethylene terephthalate).
PET is widely used to produce food and beverage containers and bottles.
This high-quality filament will give you outstanding printing results: good layer adhesion, high resolution and easy to handle.
It has a natural transparent, smooth look. Ultrafuse PET can be 100% recycled.
Tips & tricks
To make the best prints with Ultrafuse PET, we use the following settings on an Ultimaker and Wanhao Duplicator;
- Temperature at 210 degrees
- Heated bed at 75 degrees
- Speed between 30 and 70mm
- Ready with printing? The heated bed should cool down and you just can take the print off of your bed
Reference Links and Documents
- Diameter1.75 mm, 2.85 mm
- Material TypePET
- ColorNatural TR, Black, White
- Net Weight750g
- BrandBASF
- Nozzle Diameter≥ 0.4 mm
- Bed materialGlass
- Bed Temperature60 – 80 °C / 140 – 176 °F
- Build Chamber Temperature-
- Nozzle Temperature210 – 230 °C / 410 – 446 °F
- Print Speed40 - 80 mm/s
- Drying recommendations60 °C in a hot air dryer or vacuum oven for 4 to 16 hours
- Printed Part Density1329 kg/m3 / 83.0 lb/ft3
- Tensile strengthXY - 33.4 MPa / 4.8 ksi
XZ - N/A
ZX - 17.2 MPa / 2.5 ksi - Thermal PropertiesHDT at 1.8 MPa - 61 °C / 142 °F
HDT at 0.45 MPa - 63 °C / 145 °F
Glass Transition Temperature - 71 °C / 160 °F
Melt Volume Rate -16.3 cm3/10 min / 0.99 in3/10 min (220 °C, 2.16 kg)