Visit us in store or shop online and have it delivered!
1 2

Bambu Lab Support for PA/PET

Product Features

Easy removal by hand
Perfect support interface
Recommended for PAHT-CF, PA6-CF, PET-CF, PA-GF, etc.
Comes with High Temperature Reusable Spool
Diameter: 1.75mm +/- 0.03mm

Cautions for Use

ONLY used for support interface
Not used for printing models alone
AMS 2 Pro, AMS HT & AMS compatible
AMS lite NOT compatible
Dry out before use
Enclosure Printers Required




Bambu Support for PA/PET has been discontinued.
For PA/PET support applications, Bambu ABS and Bambu ASA are recommended as alternatives. Compatibility details and parameter guidelines are available on the Bambu Lab Wiki.
Note: Key settings such as interface layers, Z distance, and support structures can significantly affect print results. Always consult the Wiki before printing.

$39.99 USD
Color: Green
Type

Bambu Lab Support for PA/PET

图片加载失败文案

 

RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System). Load and print! No more tedious setting steps.

图片加载失败文案

 

Recommended Printing Settings
Drying Settings (Blast Drying Oven) 80 °C，12h
Printing and Keeping Container's Humidity < 20% RH (Sealed, with Desiccant)
Nozzle Temperature 280 - 300 °C
Bed Temperature (with Glue) 80 - 110 °C
Printing Speed < 100 mm/s
Physical Properties
Density 1.17 g/cm³
Vicat Softening Temperature N / A
Heat Deflection Temperature N / A
Melting Temperature 255 °C
Melt Index 29.2 ± 2.1 g/10 min
Mechanical Properties
Tensile Strength N / A
Breaking Elongation Rate N / A
Bending Modulus N / A
Bending Strength N / A
Impact Strength N / A

 

Printing Tips

• Support for PA/PET needs proper drying before printing: recommended drying temperature is 80 ℃ for 8 hours in a blast drying oven, or 90 ℃ for 10 hours on heat bed. Learn more about filament drying. Please refer to Filament drying coveron WIKI.

• We recommend removing the support structures within 2 hours after printing to prevent them from sticking after absorbing moisture. If sticking occurs, dry the model to ease the removal.

Which Filament for Which Nozzle