Adhesive
Sort by:Recommended
Magigoo Coater Starter Kit Thin Film Applicator
Out of stockMagigoo Starter Kit with Thin Film Applicator (metal rod).
Apply Magigoo Adhesives with a Single Swipe and Micron Precision
First layer build-plate adhesives are required to mitigate the warping effect in the FDM printing process of commodity and engineering grade thermoplastic filaments.
If your AM process involves numerous build surfaces in a printing farm set-up or 3D printers with large build surfaces, applying first layer adhesives using glue-stick, pen type or brush-on adhesives simply takes a lot of time and can result in an uneven application.
The Magigoo coater enables you to pump once and spread the layer with thin film applicator in a quick, convenient and reliable manner on your FDM printing surface.
Magigoo Coater Starter Kit Silicone Roller
Out of stockMagigoo Starter Kit with Silicone Roller (blue roller).
The Magigoo Coater with Silicone Roller is easier to use on different kinds of surfaces with different kinds of Magigoo formulations.
Apply Magigoo Adhesives with a Single Swipe
First layer build-plate adhesives are required to mitigate the warping effect in the FDM printing process of commodity and engineering grade thermoplastic filaments.
If your AM process involves numerous build surfaces in a printing farm set-up or 3D printers with large build surfaces, applying first layer adhesives using glue-stick, pen type or brush-on adhesives simply takes a lot of time and can result in an uneven application.
The Magigoo coater enables you to pump once and spread the layer in a quick, convenient and reliable manner on your FDM printing surface.
Magigoo Coater Expansion Kit Silicone Roller
Out of stockMagigoo Expansion Kit with Silicone Roller (blue roller).
The Magigoo Coater with Silicone Roller is easier to use on different kinds of surfaces with different kinds of Magigoo formulations.
Apply Magigoo Adhesives with a Single Swipe
First layer build-plate adhesives are required to mitigate the warping effect in the FDM printing process of commodity and engineering grade thermoplastic filaments.
If your AM process involves numerous build surfaces in a printing farm set-up or 3D printers with large build surfaces, applying first layer adhesives using glue-stick, pen type or brush-on adhesives simply takes a lot of time and can result in an uneven application.
The Magigoo coater enables you to pump once and spread the layer in a quick, convenient and reliable manner on your FDM printing surface.
3DLAC STICK
3DLAC STICK joins our line of 3D printing adhesive solutions that prevent warping and help to achieve 3D printed parts of excellent quality.
This new format has an applicator that facilitates the use of the product and allows to distribute the adhesive in a precise and uniform way over printing base.
To use this product you only need to press the applicator against the printing surface for a couple of seconds and once the adhesive flows, it spreads a light layer of product over the printing area. Once it has evaporated you can start printing.
Discover the new way to feel the 3DLAC power.
Sorry, we only have 233 of that item available
3DLAC Plus 3D Printer Adhesive Vapor Spray
The package includes 1 3DLAC Plus Vapor Spray container.
3DLAC Plus 3D Printer Adhesive vapor spray is the perfect substitute for Kapton tape, blue tape and other types of adhesives. It is cost efficient and easy to apply. 3DLAC ensures that the first layer of each 3D print adheres securely to the build plate surface, making sure the print starts well and stays in position. It also prevents warping of the prints and helps avoid other similar defects. The vapor spray format allows you to take our 3DLAC PLUS vapor spray everywhere.
A light 3DLAC Plus 3D Printing adhesive mist over the surface is enough to completely adhere the first layer of plastic to the build plate surface. Thanks to the properties of 3DLAC Plus vapor spray, while the base is hot the extruded plastic is firmly adhered. Once the printed part cools, the 3DLAC Plus adhesive releases and the print can be taken off smoothly and without damage.
3DLAC Aerosol Spray
The package includes 1 3DLAC Aerosol Spray container.
3DLAC aerosol spray is the perfect substitute for Kapton tape, blue tape and other types of adhesives. It is cost efficient and easy to apply. 3DLAC ensures that the first layer of each 3D print adheres securely to the build plate surface, making sure the print starts well and stays in position. It also prevents warping of the prints and helps avoid other similar defects.
A light 3DLAC mist over the surface is enough to completely adhere the first layer of plastic to the build plate surface. Thanks to the properties of 3DLAC aerosol spray, while the base is hot the extruded plastic is firmly adhered. Once the printed part cools, the 3DLAC adhesive releases and the print can be taken off smoothly and without damage.
Sorry, we only have 480 of that item available
3DLAC Plus 3D Adhesive Vapor Spray 2-pack
The package includes 2 3DLAC Plus Vapor Spray containers.
3DLAC Plus 3D Printer adhesive vapor spray is the perfect substitute for Kapton tape, blue tape and other types of adhesives. It is cost efficient and easy to apply. 3DLAC ensures that the first layer of each 3D print adheres securely to the build plate surface, making sure the print starts well and stays in position. It also prevents warping of the prints and helps avoid other similar defects. The vapor spray format allows you to take our 3DLAC PLUS vapor spray everywhere.
A light 3DLAC Plus mist over the surface is enough to completely adhere the first layer of plastic to the build plate surface. Thanks to the properties of 3DLAC Plus vapor spray, while the base is hot the extruded plastic is firmly adhered. Once the printed part cools, the 3DLAC Plus adhesive releases and the print can be taken off smoothly and without damage.
3DLAC Aerosol Spray 2-pack
The package includes 2 3DLAC Aerosol Spray containers.
3DLAC aerosol spray is the perfect substitute for Kapton tape, blue tape and other types of adhesives. It is cost efficient and easy to apply. 3DLAC ensures that the first layer of each 3D print adheres securely to the build plate surface, making sure the print starts well and stays in position. It also prevents warping of the prints and helps avoid other similar defects.
A light 3DLAC mist over the surface is enough to completely adhere the first layer of plastic to the build plate surface. Thanks to the properties of 3DLAC aerosol spray, while the base is hot the extruded plastic is firmly adhered. Once the printed part cools, the 3DLAC adhesive releases and the print can be taken off smoothly and without damage.
Sorry, we only have 480 of that item available
3DLAC Aerosol and Vapor Spray Set
The 3DLAC Aerosol and Vapor Spray Set includes one 3DLAC Aerosol and one 3DLAC Plus Vapor Spray container.
Both 3DLAC Plus vapor spray and 3DLAC aerosol spray are the perfect substitute for Kapton tape, blue tape and other types of adhesives. It is cost efficient and easy to apply. 3DLAC ensures that the first layer of each 3D print adheres securely to the build plate surface, making sure the print starts well and stays in position. It also prevents warping of the prints and helps avoid other similar defects. These two different formats provide flexibility for the use and application of this unique 3D printing adhesive.
A light 3DLAC mist over the surface is enough to completely adhere the first layer of plastic to the build plate surface. Thanks to the properties of 3DLAC vapor spray, while the base is hot the extruded plastic is firmly adhered. Once the printed part cools, the 3DLAC Plus adhesive releases and the print can be taken off smoothly and without damage.
Sorry, we only have 480 of that item available
Magigoo Pro Flex
Magigoo Pro Flex is designed for professional use, to work exclusively with TPU (thermoplastic polyurethane), TPE (thermoplastic elastomer and TPC (thermoplastic copolyester) filaments. The part should be relatively easy to remove once it cools and the glue residue should also be easily cleaned off.
TPUs, TPEs/TPCs describe a group of polymers which are sometimes referred to as thermoplastic rubbers. Thermoplastic rubbers exist as co-polymers or a polymer blend, generally of a plastic and a rubber. This imparts both thermoplastic and elastomeric properties. As a result these materials have the advantage of being able to stretch to moderate elongations and returning to the original shape.
Additionally these materials have very good thermal properties, material stability, chemical resistance, and are more cost effective to produce. As a result these materials are highly sought in industrial applications.
Some flexible filaments show lower adhesion to conventional 3D-printing build surfaces and a high tendency to warp. Others tend to stick too well to bare 3D printing surfaces such as glass and PEI. Magigoo Pro Flex is a specialized solution for FDM printing of flexible filaments which was developed to work with a wide number of flexible filament types. Magigoo Pro Flex acts as an intermediate layer between the build-plate and the printed part enabling good adhesion and facilitating print removal as required.
Sorry, we only have 17 of that item available
Magigoo Pro Kit
Magigoo Pro adhesives are designed for professional use to work exclusively with engineering filaments. These adhesives for professional use make sure prints stick firmly when the print-bed is hot and that the part is easy to remove once it cools and the glue residue should also be easily cleaned off.
CONTENT:
- Magigoo Pro PA is designed for professional use, to work exclusively with Polyamide filaments. Designed and tested to work with different PA (nylon) and fiber reinforced filament brands.
- Magigoo Pro PC is designed to work exclusively with polycarbonate type filaments and fiber reinforced variations.
- Magigoo Pro PP is designed to work exclusively with polypropylene filaments
- Magigoo Original is designed to work with a variety of filaments including most PLA, ABS, HIPS, PETG, TPU types of filaments.
Sorry, we only have 3 of that item available
Magigoo Original
Magigoo is an easy to use 3D printing adhesive designed to address ‘the first layer not sticking problem’. A strong adhesion between the 3D print and the heated build plate is ensured when applying Magigoo. However the actual magic starts when printing is ready: just wait for the plate to cool down and then remove your prints with just a finger flick! In addition, Magigoo helps to prevent warping. Isn’t it magic? Regardless of you being a hobbyist or professional – it is extremely rewarding to have a 30 hour print complete without any warping and having it release easily once cooled.
Sorry, we only have 42 of that item available
