PolyMax PLA

        PolyMax PLA

        PolyMax is a family of advanced 3D printing filaments produced with Polymaker’s Nano-reinforcement technology, to deliver exceptional mechanical properties and printing quality.

        PolyMax PLA is an incredibly easy-to-print filament with improved mechanical properties, making it an excellent alternative to ABS.

        • Red
          Black
          Grey
          Green
          Blue
          White
          Polymaker Teal
          Purple
          Yellow
          Orange
          Color: Green
        • 750 g
          3 kg
          This combination is not available
          Net Weight: 750 g
        • 1.75 mm
          2.85 mm
          Diameter: 1.75 mm
        • $29.99
        Quantity:  
        In stock
        OR

        PolyMax PLA features Polymaker's Jam-Free technology and Polymaker's Nano-reinforcement technology: Jam-Free™ technology improves the heat stability of Polymaker’s PLA filaments with softening temperatures over 140 °C. As a result, Polymaker’s PLA filaments show minimal softening in the “cold end” and can melt rapidly once entering the heating zone, leading to excellent printing quality with zero risk of nozzle jams. 

        Nano-reinforcement technology is applied to produce filaments with excellent mechanical properties and printing quality. It dramatically improves the toughness of the material by increasing its impact resistance. 

        Data Sheets:

        Technical Data Sheet - Download

        SafetyData Sheet - Download

          • SKU
            PM70482
          • Weight
            2.8 lbs
        • Diameter
          1.75 mm, 2.85 mm
        • Material Type
          PLA
        • Color
          Red, Black, Grey, Green, Blue, White, Polymaker Teal, Purple, Yellow, Orange
        • Net Weight
          750 g, 3 kg
        • Brand
          Polymaker
        • Nozzle Temperature
          190˚C – 230˚C
        • Printing Speed
          40mm/s – 60mm/s
        • Bed Temperature
          25˚C – 60˚C
        • Bed Surface
          Glass with glue, Blue Tape, BuilTak
        • Cooling Fan
          ON
        • Young’s Modulus
          1879 ± 109 Mpa
        • Tensile Strength
          28.1 ± 1.3 Mpa
        • Bending Strength
          48.0 ± 1.9 Mpa
        • Charpy Impact Strength
          12.2 ± 1.03 kJ/m2
        • Glass Transition Temperature
          61˚C
        • Vicat Softening Temperature
          62˚C
        • Melting Temperature
          149˚C
        • Drying Settings
          80˚C for 8h
        • Recommended Support Materials
          PolySupport, PolyDissolve S1

        Related products