PolyMide CoPA

        PolyMide CoPA

        PolyMide is a family of Nylon/polyamide based filaments. Produced with Polymaker’s Warp-Free technology, PolyMide filaments deliver engineering properties intrinsic to Nylon and ease of printing.

        PolyMide CoPA is based on a copolymer of Nylon 6 and Nylon 6,6. The filament combines excellent strength, toughness, and heat resistance of up to 180˚C.

        • 1.75 mm
          Out of stock
          2.85 mm
          Diameter: 2.85 mm
        • Black
          Natural
          Color: Black
        • $49.99
        Quantity:  
        In stock
        OR

        PolyMide CoPA features Polymaker's Warp-Free technology: Warp-Free technology enables the production of Nylon-based filaments that can be 3D printed with excellent dimensional stability and near-zero warpage. This is achieved by the fine control of microstructure and crystallization behavior of Nylon, which enables the material to fully release the internal stress before solidification.

        It is highly recommended to use the PolyBox when printing with PolyMide CoPA and to store it in the resealable bag. To ensure a good heat resistance of your printed part it is recommended to anneal your PolyMide CoPA 3d printed model. Annealing settings: 70˚C for 2h

        When used extensively, PolyMide CoPA can be abrasive to brass nozzles. When using PolyMide CoPA, we recommend to switch to a wear resistant nozzle such as hardened steel nozzle.

        Data Sheets:

        Technical Data Sheet - Download

        Safety Data Sheet - Download

          • SKU
            PM70809
          • Weight
            2.8 lbs
        • Diameter
          1.75 mm, 2.85 mm
        • Material Type
          Nylon
        • Color
          Black, Natural
        • Net Weight
          750 g
        • Brand
          Polymaker
        • Nozzle Temperature
          250˚C – 270˚C
        • Glass Transition Temperature
          67˚C
        • Charpy Impact Strength
          9.6 ± 1.4 kJ/m2
        • Bending Strength
          97.0 ± 1.1 Mpa
        • Tensile Strength
          66.2 ± 0.9 Mpa
        • Young’s Modulus
          2223 ± 199 Mpa
        • Drying Settings
          80˚C for 12h
        • Cooling Fan
          OFF
        • Bed Surface
          Glass with glue
        • Bed Temperature
          25˚C – 50˚C
        • Printing Speed
          30mm/s – 50mm/s
        • Vicat Softening Temperature
          180˚C
        • Melting Temperature
          190˚C