Sinterit SLS Powder

Sinterit PA12 Industrial Fresh SLS Powder (6kg)
Sinterit's PA12 Industrial is a high-resistance nylon 12 with very good dimensioning accuracy, excellent mechanical properties, high chemical resistance and biocompatibility, making it ideal for functional prototyping, jigs and fixtures, and end-use parts. Compatible with the Lisa X SLS 3D Printer, it has superior stiffness and accuracy compared to Sinterit's PA12 Smooth.
- Very good dimensioning accuracy
- Excellent mechanical properties
- High chemical resistance
- $830.00
Product amount in cartSorry, we only have 996 of that item available
Add to compare
Sinterit PA11 CF Powder 6kg
One of the strongest and most versatile materials available on the powder market dedicated to SLS printing technology.
The Sinterit PA11 CF powder is an SLS 3D printing material of biological origin that provides reliable rigidity and excellent quality. Due to its exceptional properties it is considered one of the strongest universal materials of its kind.
- $1,050.00
Product amount in cartSorry, we only have 1000 of that item available
Add to compare
Sinterit PA12 Smooth FRESH Powder
Optimized for use in Sinterit Lisa or Sinterit Lisa Pro SLS 3D Printers. The PA12 Smooth v2 Fresh powder produces high strength prints that are resistant to breaking under stress and prints remain strong across a wide range of temperature. This material absorbs very little moisture and resists penetration from fluids, oils, fuels, grease, and solvents. The product dampens noise and vibration, and can be post processed by cutting, drilling, painting or coating. Any un-sintered PA12 Smooth Fresh powder is fully reusable with a low 26% refresh rate for efficient and cost-effective performance.
New, lower refresh ratio! 26%
Comes in 2kg (4 liters) plastic bottle or 6kg (12 liters) metal container.
Choose weight:
- $300.00
- –
- $830.00
Product amount in cart
Add to compare
Sinterit PA12 Smooth STARTER Powder
A Polyamide 12 powder (nylon) for use with Sinterit Printers with good mechanical properties and excellent surface resolution, suitable for high-temperature applications and parts that need to tolerate heat.
WHEN DO I NEED STARTER POWDER? STARTER powder is intended to be used only for the first print in a new Sinterit 3D printer. After your first print you will refresh the used powder with Smooth Fresh Powder each time you print. You should not need additional STARTER powder (unless you are starting an entirely new print sequence using only STARTER powder).
Comes in 4kg (12 liters) metal container.
- $520.00
Product amount in cartSorry, we only have 7 of that item available
Add to compare
Sinterit PP Polypropylene Powder - 6Kg
Discover new applications with polymer that was not accessible with any compact SLS solution till now. PP material with good mechanical properties. Dedicated for prototyping of PP parts, as well as functional parts utilizing chemical resistance, weldability and ductility.
Comes in 6kg (12 liters) metal container.
- $1,050.00
Product amount in cartSorry, we only have 1 of that item available
Add to compare
Sinterit FLEXA Grey Powder
Flexa Grey powder from Sinterit delivers flexible prints with impressive extensibility. This Thermoplastic Polyurethane Elastomer (TPU) material has properties similar to rubber. It is both highly elastic and durable. Optimized for use with the Sinterit Lisa and Sinterit Lisa PRO it is ideal for prototyping or making flexible parts such as gaskets or joint covers.
Comes in 2kg (4 liters) plastic bottle or 6kg (12 liters) metal container.
Choose weight:
- $370.00
- –
- $1,050.00
Add to compare
Sinterit FLEXA Soft Powder
FLEXA Soft Powder – 2 kg
Low Shore-A material that could be used in design, art and simulation of really soft materials
FEATURES:
- Soft, with low A-shore value
- Elastic prints
APPLICATIONS:
- Gaskets
- Medical models
- Sensory toys
- Clothing parts
- $510.00
Out of stock
Add to compare
Sinterit FLEXA Bright Powder
FLEXA Bright Powder – 2 kg
A functional rubber material that you can dye to other colors.
FEATURES:
- Flexible
- Dyeable
- Brightly colored
APPLICATIONS:
- Pre-surgery and training printouts in the medical industry
- Flexible prototypes
- Clothing parts
- Mock-ups and models
- $570.00
Out of stock
Add to compare
Sinterit TPE Bundle
Sinterit TPE Bundle:
- Sinterit TPE Powder
- Sinterit Sealer for TPE
With TPE it is possible to print functional prototypes such as pumps, bellows, gaskets and other elastic solutions dedicated to work in difficult conditions.
FEATURES:
- Elastic
- Durable
- Dense
- After sealer covering – watertight & airtight
APPLICATIONS:
- shoes/insoles parts (wear resistance)
- watertight/airtight items
- gaskets
- skin-touch applications for rubbers
- footwear prototypes,
- hoses and tubes – it’s water/air tight
- shock absorbers
TPE Powder – 2 kg
Sinterit Sealer for TPE - a liquid pre-vulcanized rubber sealant substance for TPE.
After being dipped, printouts become hermetic and resistant against high pressure and aggresive liquids such as fuel or solvents.
- $625.00
Product amount in cart
Add to compare
Sinterit PA11 Onyx FRESH Powder
PA11 Onyx FRESH Powder
A polyamide powder (nylon) with superior thermal resistance, stable to light, UV, and weather.
FEATURES:
- high resistance against impacts
- moderate elasticity
- good chemical resistance
- dedicated only for LISA Pro (requires a nitrogen chamber)
APPLICATIONS:
- jigs, fixtures
- tools elements
- covers, housings, enclosures
- snap-fit designs
- handles, hinges, connectors
- impact-proof elements
- thermoforming molds
Comes in 2kg (4 liters) plastic bottle or 6kg (12 liters) metal container.
Choose weight:
- $330.00
- –
- $900.00
Product amount in cartSorry, we only have 8 of that item available
Add to compare
Sinterit PA11 Onyx STARTER Powder
PA11 Onyx STARTER Powder
A polyamide powder (nylon) with superior thermal resistance, stable to light, UV, and weather.
FEATURES:
high resistance against impacts
moderate elasticity
good chemical resistance
dedicated only for LISA Pro (requires a nitrogen chamber)
APPLICATIONS:
jigs, fixtures
tools elements
covers, housings, enclosures
snap-fit designs
handles, hinges, connectors
impact-proof elements
thermoforming molds
STARTER is suitable ONLY for first printing with PA11.
Comes in 6kg (12 liters) metal container.
- $690.00
Out of stock
Add to compare
Sinterit TPE Powder
TPE Powder – 2 kg
With TPE it is possible to print functional prototypes such as pumps, bellows, gaskets and other elastic solutions dedicated to work in difficult conditions
FEATURES:
- Elastic
- Durable
- Dense
- After sealer covering – watertight & airtight
APPLICATIONS:
- shoes/insoles parts (wear resistance)
- watertight/airtight items
- gaskets
- skin-touch applications for rubbers
- footwear prototypes,
- hoses and tubes – it’s water/air tight
- shock absorbers
- $440.00
Out of stock
Add to compare

Refine Your Search

Sinterit SLS Powder

Footer navigation