PolyLite ABS
PolyLite is a family of 3D printing filaments made with the best raw materials to deliver exceptional quality and reliability. PolyLite covers the most popular 3D printing materials to meet your everyday needs in design and prototyping.
PolyLite ABS is made with a specialty bulk-polymerized ABS resin, which has significantly lower volatile content compared to traditional ABS resins. It delivers excellent printing quality with minimal odor during printing.
PolyLite ABS is made with a specialty bulk-polymerized ABS resin, which has significantly lower volatile content compared to traditional ABS resins. It delivers excellent printing quality with minimal odor during printing
- Diameter1.75 mm, 2.85 mm
- Material TypeABS
- ColorBlack, White, Grey, Red, Blue, Green, Yellow, Orange, Polymaker Teal, Purple
- Net Weight1 kg
- BrandPolymaker
- Nozzle Temperature245˚C – 265˚C
- Drying Settings70˚C for 6h
- Melting TemperatureN/A
- Vicat Softening Temperature104˚C
- Glass Transition Temperature101˚C
- Charpy Impact Strength12.6 ± 1.1 kJ/m2
- Bending Strength72.8 ± 0.7 Mpa
- Tensile Strength33.3 ± 0.8 Mpa
- Young’s Modulus2174 ± 285 Mpa
- Cooling FanLOW for better surface quality; OFF for better strength
- Bed SurfaceBuildTak, PEI sheet with ABS slurry
- Bed Temperature90˚C – 100˚C
- Printing Speed30mm/s – 50mm/s
- Recommended Support MaterialsN/A