PolyFlex TPU95
PolyFlex is a family of high-quality flexible materials. It provides the perfect solution for applications where high flexibility and durability are required.
PolyFlex TPU95 is a thermoplastic polyurethane (TPU) based filament specifically engineered to work on most desktop 3D printers. It has a shore hardness of 95A and can stretch more than 3 times its original length.
Polymaker just introduced a new portfolio design, please note that PolyFlex TPU95 was formerly called PolyFlex so you may still receive a product named PolyFlex.
We highly recommend to use a direct drive printer to print PolyFlex™ TPU95. A direct drive printer is a printer with the extruder mounted on top of the hot end.
95 refers to the shore hardness of the material: 95 Shore A.
In 3D printing the shore hardness is only an indication on how flexible the printed part will be. However it is important to also take in consideration the infill percentage, number of walls, top/bottom layers and the layer height.
- Diameter1.75 mm, 2.85 mm
- Material TypeTPU
- ColorBlack, White, Yellow, Orange, Red
- Net Weight750 g
- BrandPolymaker
- Nozzle Temperature210˚C – 230˚C
- Drying Settings20mm/s – 40mm/s
- Elongation at Break330.1 ± 14.9 (%)
- Shore Hardness95A
- Tensile Strength29 ± 2.8 Mpa
- Young’s Modulus9.4 ± 0.3 Mpa
- Cooling FanON
- Bed SurfaceGlass with glue, blue tape, BuilTak
- Bed Temperature25˚C – 60˚C
- Printing Speed20mm/s – 40mm/s
- Recommended Support MaterialsPolySupport and PolyDissolve S1
