Phrozen Pro Series ABS Like Resin Creamy White
Phrozen Pro Series ABS-Like Creamy White is a great resin for highly detailed prints. The Creamy White color is perfect for viewing, post processing and painting.
Operating Instructions
- We suggest using resin and printer indoors under well-ventilated conditions.
- Avoid exposure to sunlight and indoor luminescence.
- Please preserve your resin in a closed opaque bottle to avoid exposure to air.
- Do not mix used and non-used resin together.
- Please keep the resin out of reach from children.
- Do not dump resin. Please cure resin and treat/recycle it as general plastics garbage.
Safety
- Do not eat or swallow the resin. Wear goggles to avoid eye contact with resin, if you have eye contact with resin, wash your eyes with water thoroughly.
- Resin might cause slight irritation to skin. Wear gloves when handling. Stop using if an allergic reaction occurs.
- Resin has a slight odor. We strongly suggest you use it under ventilated conditions.
- Suggested safety equipment: gloves, mask, goggles, and lab coat.
- Keep resin in room temperature (15 – 35 OC) and dry condition.
- Material TypePhotopolymer Resin
- ColorWhite
- Net Weight1 kg
- Resin HardnessShore 76D
- Resin Wavelength405 nm
- Viscosity67 cps
- XY Resolution0.050 mm
- Elongation at Yield3%
- Elongation at Break10 MPa
- IZOD Impact Strength1.44 KJ/m2
- BrandPhrozen
- Z Resolution (Layer Height)30-100 micron
- Way to RinseClean with alcohol spray with air gun
- Suitable forLCD 3D Printer
- ApplicationGeneral modeling & prototyping