CarbonX™ ezPC+CF is made using our easy to print ezPC Polycarbonate and reinforced with premium high-modulus carbon fiber. This material offers excellent printability, high thermal properties, strength & stiffness, superior dimensional stability, and an amazing surface finish. This will become your new go-to for engineering-grade parts.
ezPC™ (Polycarbonate) is a premium Polycarbonate created for ease of printing on the widest array of 3D printers. ezPC™ prints like a dream while offering low warp, excellent mechanical properties, heat resistance, and outstanding impact resistance. Ease of printing and excellent properties – the best of both worlds!
FluorX PVDF Polyvinylidene Fluoride is made using Arkema Kynar. PVDF is an excellent choice for applications that require chemical resistance, high-heat resistance, and superior abrasion resistance.
FibreX™ PA6+GF30 glass fiber reinforced nylon copolymer is an engineering-grade material that has excellent mechanical and thermal properties [HDT of 170°C] while offering ease of printing in a wide array of desktop printers. This material is a must-have when printing functional prototypes and production parts.
Obsidian™ PA6+CF is an excellent drop-in replacement for Markforged Onyx™ and is compatible for use in all Markforged printers. Obsidian™ delivers excellent performance, appearance, and a significant cost savings.
AquaTek™ X1 Advanced USM [Universal Support Material] is an advanced water-soluble support filament that was formulated specifically for printing complex parts. This material is compatible with the widest variety of model materials [PLA, ABS, NYLON, Carbon Fiber, Glass Fiber, and more!] and then it safely washes away in warm water so you don’t destroy your part removing the support.
CarbonX 10% Carbon Fiber Reinforced PEEK+CF10 3D Filament
CarbonX PEEK+CF10 is one of the premier polymers in FFF/FDM 3D Printing. Made using 10% high-modulus chopped carbon fiber for exceptional stiffness, strength, and dimensional stability.
PEEK is one of the highest performance thermoplastics ever invented. It is used in some of the most demanding applications such as seals, gears, bushings, bearings, and pump & compressor components. Industries such as Auto, Aerospace, Defense, Semi-conductor, and Oil/Gas depend on PEEK for applications where failure is not an option.
Print Carbon Fiber PEEK parts with Gearbox HT2 High-Temp 3D Printer.
CarbonX PEEK Properties Include:
PEEK has an excellent resistance to hydrolysis in boiling water and superheated steam (sterilization/autoclave) at temperatures in excess of 250°C (482°F).
CarbonX Carbon Fiber Reinforced PEEK 3D Filament
CarbonX PEEK is one of the premier polymers in FFF/FDM 3D Printing. Made using 10% high-modulus chopped carbon fiber for exceptional stiffness, strength, and dimensional stability.
PEEK is one of the highest performance thermoplastics ever invented. It is used in some of the most demanding applications such as seals, gears, bushings, bearings, and pump & compressor components. Industries such as Auto, Aerospace, Defense, Semi-conductor, and Oil/Gas depend on PEEK for applications where failure is not an option.
Print Carbon Fiber PEEK parts with Gearbox HT2 High-Temp 3D Printer.
CarbonX PEEK Properties Include:
PEEK has an excellent resistance to hydrolysis in boiling water and superheated steam (sterilization/autoclave) at temperatures in excess of 250°C (482°F).
CarbonX Carbon Fiber Reinforced PEEK 3D Filament
CarbonX PEEK is one of the premier polymers in FFF/FDM 3D Printing. Made using 10% high-modulus chopped carbon fiber for exceptional stiffness, strength, and dimensional stability.
PEEK is one of the highest performance thermoplastics ever invented. It is used in some of the most demanding applications such as seals, gears, bushings, bearings, and pump & compressor components. Industries such as Auto, Aerospace, Defense, Semi-conductor, and Oil/Gas depend on PEEK for applications where failure is not an option.
Print Carbon Fiber PEEK parts with Gearbox HT2 High-Temp 3D Printer.
CarbonX PEEK Properties Include:
PEEK has an excellent resistance to hydrolysis in boiling water and superheated steam (sterilization/autoclave) at temperatures in excess of 250°C (482°F).
Gen3 CarbonX Carbon Fiber Nylon PA6 3D Filament
Gen 3 CarbonX CF-Nylon Filament is formulated using a PA6 copolymer reinforced with high-modulus carbon fiber. This filament is ideal for anyone that desires a structural component with high modulus, improved chemical and thermal resistance, excellent surface quality, and ease of printing. Gen3 has higher HDT than our previous grades (147°C at .45MPa) allowing for expanded use in higher-temp applications.
Carbon Fiber Printer: Print industrial-grade CF-NYLON parts with Gearbox HT2 High-Temp 3D Printer.
Open Source: You do not need to purchase a special printer for CarbonX CF-Nylon. Our CF Nylon (Gen 3) is suitable for use in practically any desktop 3D Printer that has a heated bed.
Hardened Nozzles: Carbon fiber reinforced filaments are abrasive and can wear out a brass or aluminum nozzle. We recommend A2 Hardened Steel Nozzles.
3DXSTAT ESD-Safe ABS 3D FILAMENT
3DXSTAT ESD ABS is an advanced ESD-Safe filament formulated for a wide array of applications that require electrostatic discharge (ESD) protection and thermal stability up to 95°C. Made using high flow ABS and CNT’s to offer exceptional repeatability and reliability.
Target surface resistance: 10^7 to 10^9 Ohm. Compare to Stratasys ABS-ESD7 in performance and price and you’ll never go back! Made using cutting-edge multi-wall carbon nanotube technology, state of the art compounding technology, and precision extrusion processes.
3DXSTAT ESD ABS is an advanced ESD-Safe compound designed for use in critical applications which require electrostatic discharge (ESD) protection and a high level of cleanliness. Manufactured with consistency in mind, 3DXTECH starts with premium ABS and then compounds it according to a proprietary formulation of multi-wall carbon nanotubes – giving you a filament with excellent printing characteristics and consistent ESD properties.
SimuBone™ Bone Modeling Filament is the latest technology in anatomical bone modeling materials. It is ideal for use in both educational and clinical settings as a replacement for cadaver bone and for patient-specific preoperative surgical planning. Plus, SimuBone™ is ISO 22196:2011 certified antibacterial and our formulation is produced in an ISO 13485 compliant facility.
![Obsidian PA6+CF [Markforged Onyx Alternative]](http://shop.3dherndon.com/var/images/product/250.250/Obsidian-CFNylon175mm-Black-1kg-ReelPic.png)
