PolyMide PA6-GF
PolyMide is a family of Nylon/polyamide based filaments. Produced with Polymaker’s Warp-Free technology, PolyMide filaments deliver engineering properties intrinsic to Nylon and ease of printing.
PolyMide PA6-GF is a glass fiber reinforced PA6 (Nylon 6) filament. The material exhibits excellent thermal and mechanical properties without sacrificing the layer adhesion.
PolyMide PA6-GF features Polymaker's Warp-Free technology and Fiber Adhesion technology: Warp-Free technology enables the production of Nylon-based filaments that can be 3D printed with excellent dimensional stability and near-zero warpage. This is achieved by the fine control of microstructure and crystallization behavior of Nylon, which enables the material to fully release the internal stress before solidification. 
Fiber Adhesion technology improves the layer adhesion of fiber reinforced materials, by optimizing the surface chemistry of the fibers to achieve better dispersion and bonding to the matrix. This results in better strength along the Z-axis and reduced mechanical anisotropy. 
Technical Data Sheet - Download
SafetyData Sheet - Download
- Diameter1.75 mm, 2.85 mm
- Material TypeNylon
- ColorGrey
- Net Weight2 kg, 500 g
- BrandPolymaker
- Nozzle Temperature280˚C – 300˚C
- Heat Deflection Temperature (ISO 75 0.45 MPa)157 ˚C
- Heat Deflection Temperature (ISO 75 1.8 MPa)191 ˚C
- Melting Temperature215 (°C)
- Glass Transition Temperature67˚C
- Charpy Impact Strength16.5 ± 0.5 (kJ/m2)
- Bending Strength136.4 ± 1.6 (MPa)
- Tensile Strength84.5 ± 2.1 (MPa)
- Young’s Modulus4431 ± 184 (MPa)
- Drying Settings80˚C for 12h
- Cooling FanOFF
- Bed SurfaceAlmost any surface with a thin coat of PVA glue or Magigoo PA
- Bed Temperature25˚C – 50˚C (Do NOT exceed 50 ˚C)
- Printing Speed60mm/s
- Recommended Support MaterialsPolyDissolve S1
